04 Acura Mdx 3.5l ?
my acura started running really rough and i was told it needed a timing belt due too having cam and crank position sensor codes with a blinking check engine light so we did replace it
now its doing the same thing engine light flashing same codes crank and cam extended crank time and sometimes it will just crank and wont start sometimes it will start and barley stay running and will stall has new spark plugs any suggestions
also we have no throttle response
- thebax2006Lv 74 weeks ago
You didn't change regular oil every 3,000 miles and now the cam advance actuators are seized up because of dirty and low oil levels.
That's very common on all motors with adjustable cam timing!Source(s): Mitsubishi Master Tech
- 4 weeks ago
We definitely realigned the cams and crank
- DanLv 44 weeks ago
Replacing the timing belt is one thing, replacing it correctly is another. If you were told the timing belt was causing cam - crank correlation codes then the timing belt had jumped and the cam timing was off. Putting a new belt on won't fix that unless you re-timed everything, that means moving the cams to the correct position in relation to the crank. Also, you may want to say a little prayer because it's possible some valves were bent when the belt jumped.