The bolt screw to unbolt the spare tire in my toyota camry is stuck.?

15 Answers

Relevance
  • hart
    Lv 6
    4 weeks ago

    Use WD 40 or hit steel bolt with the hammer to loosen off the rust

  • Anonymous
    4 weeks ago

    Try your best possible as you can.

  • zipper
    Lv 6
    4 weeks ago

    Take it back to Japan and get it fixed!

  • Anonymous
    4 weeks ago

    Check to make sure there is no locking pin in the nut that is preventing you from turning it.  Most of the time the tire just lays there over the stud and is not fastened down.

    • Anon4 weeks agoReport

      Rubbish. No spare is so locked in a Camry. Maybe on tailgate of a Land Cruiser is there an actual Padlock thru one of the studs.

  • How do you think about the answers? You can sign in to vote the answer.
  • 4 weeks ago

    Then use a tool to unscrew it!

    Call a tow truck if you don't have tools and have a flat tire.

  • don r
    Lv 7
    4 weeks ago

    Try sliding the tire side to side as you wiggle the bolt and unscrew it. You might use a crescent wrench on the handle until you get it started coming loose. If push comes to shove, it might help to let a few pounds out of the tire to relieve tension. Don't forget to pump the tire back up to 32 Lbs. Put a dab of grease on the hole before you put the bolt back. Good luck.

  • 4 weeks ago

    IF all else fails, BREAK IT. The vehicle can operate as safely without the spare being secured wherever it is stored.

  • JetDoc
    Lv 7
    4 weeks ago

    That's nice. Would you like to ask a question while you're here?

  • Greg
    Lv 7
    4 weeks ago

    Liquid wrench, tap it, wait, apply some more, tap it, and try.

  • 4 weeks ago

    Lefty loosy righty tighty

Still have questions? Get your answers by asking now.