how do you fix the paper jam notification on my hp psc 1350?

i have a hp psc 1350 all-in-one and i had a paper jam but i cleared it out and i can copy but not print from my laptop all it says is paper jam and sits in my que how do i reset the paper jam notification on my computer

6 Answers

Relevance
  • 8 years ago
    Favorite Answer

    Clear any loose paper from the paper tray. This will help you locate the jam. You will find it either in front, near the paper tray, or in the back, by opening the rear door.

    Be sure there is no paper or debris hidden anywhere. Open up the rear door and use a flashlight to explore the inside. If you see any paper, have patience in trying to remove it. slightly pull using a side to side motion. If you use a tool for help, like a pair of needle nose pliers, put some tape on the jaws of the pliers to help prevent the shredding of the paper.

    Another good item to have handy is canned air. This can be used to blow out any built up dust or fine paper particles that may be embedded inside the printer and the sensors after much use.

    • Commenter avatarLogin to reply the answers
  • 8 years ago

    How to Clear a Paper Jam on an Epson Inkjet Printer

    How to Clear a Paper Jam on an All-in-One Printer

    Instructions

    1

    Turn the printer off and on to see if it can automatically clear some or all of the jam. Many printers provide an error-code listing on the front panel display for the area where the jam occurred. If your printer shows an error code, be sure and check the printer manual to see if that identifies the area of the printer where the jam occurred.

    2

    Turn off the printer.

    3

    Remove any paper trays. Inspect them for wrinkled or damaged paper.

    4

    Open any other doors that give access to the printer's paper path and to the toner or ink cartridge.

    5

    If necessary, remove the toner or ink cartridge. Place it in a bag or away from light to avoid damaging it.

    6

    If you find a piece of jammed paper, remove it by holding it with both hands and pulling firmly (see A). The goal is to keep the paper from tearing. If several pieces are jammed together, try pulling out the middle piece first to loosen the jam.

    7

    If the paper does tear, try rotating the roller gears manually to free the paper (see B). Don't force anything, though.

    8

    Replace the toner or ink cartridge and paper trays, close any doors you opened and turn the printer back on.

    9

    If the printer paper jam message still appears, then there is still some paper in the printer. Reinspect the paper path.

    • Commenter avatarLogin to reply the answers
  • 8 years ago

    When working with any printer it's inevitable that you'll encounter a paper jam. Below are the steps you'll want to follow when this occurs.

    Turn off the printer.

    Inspect the location or tray the printed paper ejects to. If the stuck paper is visible manually remove it.*

    Remove all paper trays and any paper that may be stuck between the tray and the printer. If the stuck paper is visible manually remove it.*

    Open the printer door that allows you access to the printer ink cartridges or toner and look for any stuck paper. If the stuck paper is visible manually remove it.*

    Turn the printer back on. If you continue to receive a printer jam error try repeating the above steps again. If issue still persist and you see no paper that is stuck in the printer it's likely your printer is experiencing another hardware issues and we suggest contacting the printer manufacturer for additional assistance or repair.

    * To manually remove paper pull on the paper with both hands being careful not to tear the paper while pulling it. If you're unable to get to an edge of the paper that allows you to pull it you may need to manually rotate the gears that feed the paper through the printer.

    • Commenter avatarLogin to reply the answers
  • Anonymous
    8 years ago

    If u can copy then ur printer is ok. if ur paper loading is ok how pc can show it ?? look at ur printer display and if its not showing any paper jam then its ur pc problem. remove ur printer cable from ur pc and delete all print job. check job is cancelling or not. if not restart ur pc. open it as save mode. then cancel the jobs.

    after cancel jobs connect the cables. if problem solve then thanks me. if not, check ur paper loading sensor.

    Though u wrote u can copy so it might not possible to paper jam cos for copy printer need to feed papers and its clear that u dont have any jam issue.

    • Commenter avatarLogin to reply the answers
  • How do you think about the answers? You can sign in to vote the answer.
  • Anonymous
    4 years ago

    check for stray papers that are jammed in the printer, and just restart it,

    • Commenter avatarLogin to reply the answers
  • Anonymous
    8 years ago

    To keep my kid in central board school from nursery or from his 1st standard "I have answer it last week

    "

    Source(s): I have answer it last week
    • Commenter avatarLogin to reply the answers
Still have questions? Get your answers by asking now.