how do i fix my canon pixma mp130 printer when pop up shows waste ink absorber almost full change?
- 9 years agoBest Answer
1) Enter SERVICE MODE By pressing Menu-Scan-Copy-Scan
2) Enter NVRAM by presing <--- or ---> then OK
3)SET ABS-M LEVEL TO 0
1 press menu
2 PRESS scan copy scan to enter service mode
3 use > to go to NVRAM ACCESS
4 set ABS-M LEVEL TO 0
5 Set ABS P LEVEL TO 0
6 Set press STOP to EXIT
- refsocrd1Lv 49 years ago
first change the absorber.
IF you don't you'll wind up with ink coming out of the printer eventually.
Then follow the standard reset procedure.
DON"T JUST RESET IT!!