有關回答電腦問題 的英文幫忙翻中文

這是我的電腦有問題 人家的回答 可是我英文不好

I converted my primary HD (C:\) from FAT32 to NTFS this evening. (I had already converted my secondary HD, D:\, from FAT32 to NTFS earlier today.) Everything looked like it had completed correctly, and my system restarted. After it went through its start up screens ("Gateway" and the like), all I got was a blinking cursor in the top left corner of my screen--Windows never started back up. I had created a boot disk, so I tried to boot up my PC from that. When I did, and I tried to change directories to my C:\ HD or my D:\ HD, it didn't recognize that any HDs were installed. When I went into the system set-up and looked at the HD configuration, the same thing--it didn't look like the HDs were even installed.

Luckily, I have a case for an internal hard drive to be used as an external hard drive, so I was able to verify that everything on my primary HD (C:\) was still there.

Any ideas on what happened and what I can do to fix this? Thanks!

1 Answer

Rating
  • Lazzya
    Lv 4
    1 decade ago
    Favorite Answer

    今晚我把我主要的硬碟區(C槽)格式由FAT32重新格式化成NTFS(今天稍早之前,我已經把此要的硬碟區(D槽)格式化成NTFS了)。每件事看起來已經完全回復正軌,我也重新開機,然後,電腦的畫面直接跳到MS-DOS的star up screens (就是俗稱的"Gate way")。我所看到的只有滑鼠游標在螢幕的左上角不停的閃爍著---Window系統並沒有真正的開始備份。我已經開了一個磁碟的根目錄,所以我試著從這邊重新開機。當時我試著將開機指令改成從C槽或D槽開啟,但是電腦並未偵測到任何已安裝的硬碟。當我從系統的Set up這邊看硬碟的配置狀態,還是同樣的狀況---沒有任何硬碟已被安裝。

    幸運的是,我有一個外接式硬碟,所以有辦法確認我原先C槽的資料都還在。

    有誰知道我的電腦發生了什麼事嗎?我又該怎麼解決? 謝謝!

    2009-05-27 00:39:49 補充:

    注:

    1. FAT32跟NTFS是格式化的兩種選擇。

    2. Start up screens: 開機時,畫面不是跳到Windows的畫面,而是跑到灰灰的那種,就像過去MS-DOS的那種畫面

    ==============================

    他的回答也是在發問,告知他電腦的狀況,並請求解決之道。

Still have questions? Get your answers by asking now.