Ken asked in Cars & TransportationCar MakesGMC · 1 decade ago

Question about changing ABS sensor on 1999 Cadillac Seville STS...?

It seems that both rear L/R ABS sensors arent giving any output and need replacement, Has anyone ever replaced one? I'm fairly good mechanically, and havent really looked to be honest. With the weather its intolerable. Is it a simple bolt or is a one piece unit with the hub? Just to be more specific. Its for both rear ABS sensors on a 1999 cadillac Seville STS. Thanks.

3 Answers

  • Anonymous
    1 decade ago
    Favorite Answer

    Many/Most ABS sensors can not be replaced.

    Some can.

    If you are looking at purchasing a new hub, I suggest a USA made one from , especially if you are going to replace the hub yourself

    Good Luck!

    Source(s): - wheel bearing
  • Anonymous
    1 decade ago

    I haven't done one on a cadillac, but what I will tell you to do is to look up the part on the internet and get a really good detailed photo of it, what this will do is tell you what to expect in regards to fasteners and things that might be holding it in place! Next I would say run to your local parts store that carries repair manuals and take a look at one and jot down notes if you don't want to purchase the manual, which is a good investment of 20 dollars I must say!

  • 4 years ago

    Get a Haye's manual for the vehicle from your local parts store.

Still have questions? Get your answers by asking now.