Can some one please answer the following electronic / electrical questions correctly.?

1. A 24V DC MOTOR READS 10 MEG-OHMS BETWEEN ONE OF THE POWER TERMINALS AND THE CASE OF THE MOTOR. WHICH OF THE FOLLOWING IS CORRECT? a. This is a normal condition b. This motor is shorted c. The motor is grounded d. The motor fields are open 2. WHAT FUNCTION DOES A DIODE PERFORM? a.Allows flow only when... show more 1. A 24V DC MOTOR READS 10 MEG-OHMS BETWEEN ONE OF THE POWER TERMINALS AND THE CASE OF THE MOTOR. WHICH OF THE FOLLOWING IS CORRECT?
a. This is a normal condition
b. This motor is shorted
c. The motor is grounded
d. The motor fields are open

2. WHAT FUNCTION DOES A DIODE PERFORM?
a.Allows flow only when gated on
b.Allow flow in only one direction
c.Opposes changes in voltage
d.Opposes changes in current

3. A SPOTLIGHT KIT FOR OFF ROAD VEHICLES INCLUDES LIGHTS, FUSE, WIRING, SWITCH, AND RELAY. WHAT IS THE PURPOSE OF THE RELAY?
a.To limit the length of the power circuit wiring
b.To provide flexible wiring options
c.To accommodate the high current requirements
d.None of the above

4. A DIODE IS SUSPECTED TO BE BAD. IF IT IS SHORTED, WHICH OF THE FOLLOWING STATEMENTS PROPERLY DESCRIBES THE METER READINGS?
a.High resistance in both directions
b.Low resistance in both directions
c.Low resistance in one direction
d.None of the above

5. GEAR ‘X’ HAS 50 TEETH AND TURNS 100 RPM CW. GEAR “Y” HAS 25 TEETH AND MESHES DIRECTLY WITH GEAR “X”. WHICH IS TRUE OF THE MOTION OF GEAR “Y”?
a."Y" turns 50 RPM CW
b."Y" turns 50 RPM CCW
c."Y" turns 200 RPM CW
d."Y" turns 200 RPM CCW

6. WHICH OF THE FOLLOWING IS A PRECISION INSTRUMENT?
a.Strap Wrench
b.Box Wrench
c.Torque Wrench
d.Combination Wrench

7. WHICH OF THE FOLLOWING TASKS REQUIRES THE USE OF AN EASY-OUT EXTRACTOR?
a.Remove pins from electrical connectors
b.Remove broken bolts
c.Remove bearings
d.Remove seals

8. WHICH OF THE FOLLOWING SCREWDRIVERS IS DESIGNED FOR USE IN CONFINED AREAS THAT CANNOT BE ACCESSED WITH A STANDARD SCREWDRIVER?
a.Cross Tip
b.Hex Bit
c.Cross Point
d.Offset

9. WHAT FUNCTION DOES A HYDRAULIC CHECK VALVE PERFORM?
a.Allows flow only in one direction
b.Regulates pressure
c.Provides a connection for a pressure gauge
d.Provides a way to view oil level

10. THE ON/OFF SWITCH IS TURNED TO THE ‘OFF’ POSITION IN A PROPERLY FUNCTIONING SIMPLE SERIES CIRCUIT. WHICH OF THE FOLLOWING DESCRIBES THE CIRCUIT CONDITION?
a.Shorted
b.Closed
c.Partially Open
d.Open
1 answer 1