[英文]拜託幫我修改一下文件~中翻英!謝謝幫忙

自己已經有先寫過!不過怕語法和語意有錯。 所以拜託幫我看一下!謝謝幫忙!十分感激 並且測試輸出資料儲存在正確的位置 And then also test output data are saved in the correct address. 當訊號”A”為high, B將資料傳送到C When “A” is high, the data of B transfers to C. 有兩種主要操作模式:write 模式時,wr_en會enable, Addr 會送到FPGA內部的DMADEC,經由addr... show more 自己已經有先寫過!不過怕語法和語意有錯。
所以拜託幫我看一下!謝謝幫忙!十分感激


並且測試輸出資料儲存在正確的位置
And then also test output data are saved in the correct address.

當訊號”A”為high, B將資料傳送到C
When “A” is high, the data of B transfers to C.

有兩種主要操作模式:write 模式時,wr_en會enable, Addr 會送到FPGA內部的DMADEC,經由addr block產生addr,控制訊號將A和B的資料存入產生的位置上。另一種為read... block和TPAddr block產生addresses,控制RO_en或TP_en enable將address對應的資料送出。最後by(藉由) DMA process,當RD_EN enable資料傳送到C上.
It’s major two operating mode: write and read mode. When write mode, the WR_EN enable. And the Addr sends to DMADEC in FPGA. The address is generated by Addr block. The data of A and B is saved to generated address by controlling signals. And the other is read mode, the Addr and TPAddr block generate addresses, it sends the data which by controlling RO_en and TP_en enable. When the RD_EN enables, the data goes through C by DMA process finally.
Update: to ytalee :
謝謝提醒我一些該注意的地方!!
真的很感激!

to hjq_3 :
不好意思表達不好orz
意思是 B 的資料會被傳送到 C
所以應該這樣寫
...the data of B will be transferred to C.

謝謝提醒!!
真的有很多地方需要改進和注意的
再次謝謝orz
3 answers 3