are abec 3 bearings better for tricks on a skateboard then abec 7?
because i bought a board 3 years ago and i think i got abec 7s but now im getting back into sk8ing again and im finding the board keeps slipping out underme wen i try to do tricks so yer
- Fun SkaterLv 71 decade agoFavorite Answer
Joe and PX are somewhat right but not complete.
ABEC is not related to inline skating or skateboarding. It is a related to precision to prevent vibration in high speed machinery. It can have an indirect relation to quality in that people who make very precise bearings usually put some care into making them. I the early days of skating there were many companies that use "precision" bearings. Precision is an industry grade that basicly says that the bearings roll but can be sloppy or very poor. ABEC became a marker of good quality.
Some of the best bearings by companies like Bones, ZeroDrag, andTwinCam were designed to be better rolling by deliberately violating the requirements of the ABEC ratings.
The companies that sell ABEC rated bearings are not selling you factory "spare parts". They may not have the ability to spend the money or skills to design their own bearings and have a bearing maker do the custom work for them. So they look for a bearing maker that has a stock bearing that fits their needs.
I know the owner of ZeroDrag. The bearings are made by a major US bearing manufacturer and the upper end bearings were designed by the manufacturer's engineers to his specs.
If your board is slipping out from under you, you might want to slow down your bearings a little. The lubricant in the bearing has more to do with it's rolling speed than the grade.
If you find some cheap bearings with grease, it will slow down your board till you get the tricks back, then put your good bearings back in and fly again.
If you don't want to buy more bearings or want more control over the speed, just open up your bearings (you can leave the inside shield off since dirt cannot get in from there) and put a little grease in them. Try it out and see if you want more.
- Anonymous1 decade ago
Abec doesn't rate skateboard bearings at all. Thay rate them for machines (and machines don't do tricks). Buy some Bones, even Reds, and be rid of this corrupt discussion!!! Skaters should all know they are buying a mystery product if it is rated by the ABEC (Annular Bearing Engineers Committee). Just quit skating the factory's spare parts and you'll find out if it's your shoes...Source(s): Factory spare parts specialist and skater.
- Anonymous1 decade ago
Abec ratings measure how fast/ how long they will roll, so they don't affect tricks.
When you quit skateboarding for a while, you end up losing your sense of balance and have to re-learn tricks. Just give it some time, you'll get used to the bearings soon.
- Holly-lynnLv 44 years ago
The difference between abec3 and aBec7 seven is the polishing on the BBs inside the bearing. Some are built for speed which would be abec7, However abec7 Can get dirty faster and they can seize faster. Abec3 Can handle a lot of wear and tear. I would personally go with the abec 7
- How do you think about the answers? You can sign in to vote the answer.
- Mike NLv 41 decade ago
Abec 3 would be fine, I like abec 5.
- 1 decade ago
i jus lyk bought abec7 bearing and i like them there quiet and fast but the problem may also be ur shoes i jus also bought Circa and there lyk my second pair of them and i find the 2 keep u on ur griptapeSource(s): vert sk8er sum street