How do i change the starter on a 2000 Dodge Intrepid 3.2 liter?
Please i need help! Can anyone tell me where the starter is located at and how do i change it on a 2000 Dodge Intrepid 3.2 liter? THANK YOU!! :>)
- MarJoeLv 61 decade agoFavorite Answer
Follow the positive cable down to the starter. They are held in with 2 or 3 bolts. Disconnect the battery first then take the wires of the starter and the bolts out. Then take it to Auto Zone and have it tested if it's bad then replace it.
- 5 years ago
Your best bet is to buy a service manual for your car and read the procedure. IF there is ANY doubt in your mind as to your ability to perform the task at hand- pay a professional technician to do the job. Be aware that a jack is required to lift the engine and remove the left motor mount to gain access to the starter.
- 1 decade ago
Look in the area right under the engine, its should look like this-http://upload.wikimedia.org/wikipedia/commons/thum...
Then there should be two or three bolts holding it up to the engine, also two wires held on to it by screws. Take those off as well. Replacement, just do everything in reverse order.