AOL recently Updated the safety and security center , which is causing hindrance while installation of the all in one software. To resolve this issue , Uninstall the AOL safety and security center on your computer. by unplugging the USB cable between the printer and the computer. I assure you that this should resolve the issue.
For your convinience I am providing the steps to uninstall the Security suit.
Uninstallation of AOl software on your computer
Click Start > Control Panel > Add/remove programs.
Under Currently installed programs >> click AOL® UNINSTALLER >> Change/Remove
In the AOL® Uninstaller window
click the box next to AOL ANTIVIRUS,
AOL SPYWARE PROTECTION,
AOL FIREWALL to place a check mark in it,
then click the UNINSTALL button.
In the Confirm Install window, click the YES button.
Click the AOL SAFETY AND SECURITY CENTER box to place a check mark in it, then click the
UNINSTALL button. Click the YES button, then restart your computer when
If the issue is not resolved with the above steps .
Perform the following steps
Install the Software first – Do Not Plug the USB cable when prompted continue the installation by selecting the option "connect the device later".
After completing the S/W installation, Click Start -> Run -> type MSCONFIG.
Click on the Services Tab.
Put a check mark on “Hide All Microsoft Services”.
Then Uncheck all the Services that are related to the the "AOL" in the same screen.
Click Apply, and clock Close.
Restart the computer as is instructs.
Now connect the USB cable, should install fine from there.
Go back to MSCONFIG and on the general tab select “Normal Start Up” to make all the services normal.
Restart the computer, try to print. . .. it should get installed and print.
If the software is already installed in the pc, unplug the Usb cable from pc, remove the printer icon from the Printers and Faxes, Uncheck the AOL services in the msconfig, restart the pc and plug back the USB Cable and continue with the Found New Hardware Wizard.
This problem may be due to one of the AOL services' influence on the Plug and play service, resulting some negative impact on it.
Ultimately this results improper USB enumeration and unsuccessful driver installation.
Please let me know if any issue gets resolved using the above mentioned steps.