王子麵 asked in 電腦與網際網路軟體 · 1 decade ago

安裝daemon406-x86出現訊息!請問是什麼意思?虛擬

請問各位大哥大姐這是什麼意思我要安裝daemon tool時候,出現這個訊息!好像建議我取消安裝的樣子。因為之前有灌過酒精,解果整台當機!再也無法開機。所以現在不管亂安裝類似的虛擬光碟了。請教各位大大,各個我該怎麼做呢?

1 Answer

Rating
  • Paul
    Lv 6
    1 decade ago
    Favorite Answer

    完美解決DaemonT4裝設問題,●解決方案一:第一步,這也是解決DT問題最關鍵的一步,進入C槽刪除Windows\System32\Drivers\dtscsi這個系統檔案。第二步,去下載Daemon tool的x86(這裡要說明的就是要看你的系統,如果不是32bit的,就去下sptdinst_x64那個版本)下載完畢後最好直接放在C或D根目錄下。(我是放在D)第三步,重新啟動,在開機狀態下連續按F8進入安全模式,進入之後點開始選單->執行->輸入cmd->輸入D:再輸入D:\ sptdinst_x86.exe add, 輸入正確後你能看到出現「You need reboot........」這句,而不是像往常一樣彈出 "This program will install SCSI Pass Through Direct (SPTD) layer on your computer. WARNING SPTD is not compatible with kernel mode debuggers  (SoftICE, WinDBG etc.)! Please cancel setup if you plan to use kernel debugger on this machine." ,點確定。第四步,重起,在正常模式下就裝設DT4了,裝設完畢後會出現'Virtual SCSI Driver Not Detected'且右下角無圖示,這時候別著急再重新啟動第五步,完成了,看到圖示沒有~~~~~~~~~:)●解決方案二:Q:My system won't boot after installation of v4, or problems with SPTD.SYS If your system has some problems with SPTD installation you can do as follows: If your OS is already running then go to step 2 directly. If you cannot boot your PC at all then start from step 1. 1. Boot in safe mode and press ESC key when you see on bottom line of display: "Press ESC to cancel loading SPTD.sys". This will abort loading of SPTD layer. (進到安全模式上,按ESQ停止載入SPTD。SYS)2. Remove or temporarily rename WINDOWS\System32\Drivers\sptd.sys. (刪除WINDOWS\System32\Drivers\sptd.sys)3. Reboot again in normal mode and check if your issue is solved.重開機到正常模式In case you had BSOD/crash you can check for minidump (in Windows\Minidump folder) related to that crash, send newest file to support@daemon-tools.cc with exact problem description.Do NOT send minidump, if your problem is solved after removal of Starforce drivers! (Check this thread.)Note that you have to rename sptd.sys back after the problem causing the crash is solved in order to get Daemon Tools working.如還有問題就將sptd.sys 改名字.You can also download sptdinst.exe (in our download section) for your Windows version (i.e. sptdinst_x86 for 32bit Windows, spdtinst_x64 for 64bit Windows) and execute "sptdinst remove", reboot to complete de-installation.重新下載sptdinst.exe,是32 bit 電腦就下載sptdinst_x86 ,64 bit 就下載spdtinst_x64 , 然後執行 "sptdinst remove"重開機再重新安裝一次就可以.

Still have questions? Get your answers by asking now.