請問兩台筆記型電腦透過紅外線如何連上網路? (10點)

請問大家

我家目前有兩台筆記型電腦

但是家裡網路線只有一條

(我現在在西班牙 原本想買一個網路分配器

可是這裡電話公司很怪 說一個無線的分配器要差不多台幣 4800元 太誇張)

所以我和我室友今天就再試用紅外線連線

網路線是插在他的電腦上

我們紅外線設定都ok了 我的電腦網路也顯示連上了

(右下角兩台小電腦有出現 且都有在閃)

可是很奇怪 網路開不了 msn也不能上

想請問大家~ 是不是還要設定什麼東西?

ps. 或是有另外得方法可以讓兩台電腦都連線呢?

(我們可以自己去買一台網路分配器裝嗎? 因為電話公司賣的好貴~

或是以纜線的方式連線兩台電腦呢?)

請大家幫幫忙吧~ 感恩~~ = )

1 Answer

Rating
  • 1 decade ago
    Favorite Answer

    In a Direct Connection, one PC acts as the Host and the other as the Guest.  If the Host PC is connected to the LAN, the Guest PC can share the LAN connection across Ir.  Direct Connection Between Two PCs Under Windows 2000 :Host PC Setup1. Click on the“Start”button, then browse to“Settings”, “Network and Dial-up Connections”, “Make New     Connection” 2. When the“Network Connection Wizard” starts, click“Next” to continue 3. Check the box next to “Accept Incoming Connections” and click “Next” 4. Check the box next to “Infrared Port” and click “Next” 5. Check the box next to “Allow Virtual Private Connections” and click “Next”6. Select which users will be allowed to use this connection and click “Next” 7. Select all Networking Components enabled for this connection and click “Next” 8. Click on “Finish” Guest PC Setup1. Click on the “Start” button, then browse to “Settings”,  “Network and Dial-up Connections”, “Make New   Connection” 2. When the “Network Connection Wizard” starts, click “Next” to continue .3. Check the box next to “Connect Directly to Another Computer” and click “Next”4. Check the box next to“Guest” and click“Next”5. Select the“Infrared Port” and click“Next” 6. Select your preferred connection availability and click“Next” 7. Click on “Finish”To Connect1. Ensure the two USB-IR Adapters are pointed at each other and within 1 meter. 2. On the Guest PC, click on the “Start” button then browse to “Settings”,  “Network and Dial-up  Connections”, and select “Direct Connection”3. Enter a Username and Password4. Click on “Connect”     By default, if you click on the “My Network Places” you should be able to see the entire network, including the Host PC. However, the Host PC will not see the Guest PC under “My Network Places”.  You must manually add it, by clicking on “My Network Places”, selecting “Add Network Place”, and typing the name of the Guest PC (i.e if the Guest PC is named “Guest”, you would type \\Guest\ for the location when prompted).  You may be prompted for Username and Password –

    Source(s): 曾任職亞太區唯一IrDA認證實驗室工程師與Tech-Support Eng
Still have questions? Get your answers by asking now.