squall asked in 社會與文化語言 · 1 decade ago

請教:幫忙翻譯以下的內容嗎?中翻英~謝謝

本研究內容主要針對各種不同材質的不銹鋼切削理論及實驗操作,

目的在建立有關表面粗糙度的預測及切削參數的最佳化,用來取代傳統的試誤法。以求尋找出各種不銹鋼材質的最佳切削參數組合。

而研究的架構是針對不同材質或不同熱處理條件之不銹鋼材,利用田口氏實驗設計方法,選擇最佳範圍中的切削條件數據,以進行一系列之切削加工實驗。固定切深而在不同心軸轉速和進給速度下,所得到表面粗糙度,以便求得不同材質的不銹鋼的最佳參數。

2 Answers

Rating
  • Favorite Answer

    This research content mainly to the stainless steel of various different material slices to pare the theories and the experiment operation,

    The purpose is building up the rough degree of the relevant surface of estimate and slice to pare the parameter of optimization, use to replace to traditionally try the mistake method.In order to look for various stainless steel material of the best slice to pare the parameter combination.

    And research of the structure aims at the stainless steel material of the different material or dissimilarity hot processing condition, making use of the farmland a surname experiment design method, choosing the best scope in of slicing and paring the condition data, to carry on a series of slicing and paring to process experiment.Fixedly slice deeply and turn in the different heart stalk soon and enter to the speed under, gain the rough degree of the surface, in order to beg the best parameter of the stainless steel of different material.

    Source(s): 網路
  • 1 decade ago

    This research contents cut theory and experiment to operate to the stainless steel of different materials mainly,

    Set up the optimization about the prediction of the roughness of surface and cutting parameter in purpose , used for replacing traditional trying missing the law. In order to look for out the best cutting parameter associations of different stainless steel materials.

    And the structure studied is directing against the stainless steel material of different material or different heat treatment condition , utilize the design method of the experiment of field mouth, choose the cutting condition data in the best range, process the experiment in order to carry on a series of cutting. Cut regularly deeply in the concentric rotational speed of axle , in order to try to get the best parameter of the stainless steel of different materials.

    Source(s): dr.eye
Still have questions? Get your answers by asking now.