Anonymous
Anonymous asked in 社會與文化語言 · 1 decade ago

A 4 way 3 position....媽呀,這段話是啥

A 4 way 3 position proportional directional vale with a closed center. The valve should

have a feedback LVDT installed on the spool to close the loop between command and actual spool position.This will provide better control during the deceleration phase of the cycle due to the possibility of pressure spikes.On board electronics is not a requirement,but simplifies the wiring.

請高手協助翻譯上述4句話,好心人士就不要再用翻譯軟體幫忙,因為會翻譯得很奇怪,謝謝!!

3 Answers

Rating
  • ?
    Lv 6
    1 decade ago
    Best Answer

    A 4 way 3 position proportional directional vale with a closed center. The valve should

    have a feedback LVDT installed on the spool to close the loop between command and actual spool position. This will provide better control during the deceleration phase of the cycle due to the possibility of pressure spikes. On board electronics is not a requirement, but simplifies the wiring.

    一個對稱、具有方向性的閥應有 4個通道、3種設定位置以及一個封閉的中心。閥的線軸上應裝有一個反饋性的LVDT,用來封住在下指令到實際線軸位置之間的迴路。這個設計針對因為壓力突然上升造成的減速階段提供了更好的控制。控制板上不需要加其他的電路,但是要簡化配線工程。

    Source(s): 我和字典
  • 1 decade ago

    A 4 way 3 position proportional directional vale with a closed center.

    一個有4個方向以及3個位置, 對稱且定向的閥門和一個封閉的中心。

    The valve should have a feedback LVDT installed on the spool to close the loop between command and actual spool position.

    閥門應該安裝一個反應的LVDT在線軸上, 用來關閉在指令和實際線軸位置間的迴路.

    This will provide better control during the deceleration phase of the cycle due to the possibility of pressure spikes.

    由於壓力突然增強的可能性, 將給循環的減速階段提供更好的控制.

    On board electronics is not a requirement,but simplifies the wiring.

    不需要電子裝置, 但應該簡化接線.

  • Anonymous
    1 decade ago

    一個4 方式3 位置比例定向榖以一個閉合的中心。 閥門應該

    把反饋LVDT 被安裝在短管軸關閉圈在命令和實際短管軸位置之間。這將提供更好的控制在週期的減速階段期間由於壓力釘的可能性。在電子上不是要求, 而是簡化接線。

    Source(s): WorldLingo
Still have questions? Get your answers by asking now.