人工GPS asked in 政治與政府軍隊 · 1 decade ago

最強貫穿子彈

目前子彈(步槍 狙擊槍 機槍 戰鬥機的機槍......等)的貫穿能力有辦法貫穿歐美的主力戰車嗎???

4 Answers

Rating
  • Anonymous
    1 decade ago
    Favorite Answer

    首先給你看一下手槍、步槍的子彈結構類型

    Bullet Types:

    BHP - Bonded Hollow Point. Same as the JHP, but the metal jacket has been chemically bonded to the lead core to ensure that the jacket cannot separate from it on impact. This is desirable for when a bullet may need to penetrate glass or thin metal and still remain intact.

    FMJ - Full Metal Jacket. A bullet completely enclosed (except for the base) in a hard metal jacket (usually an alloy of copper, sometimes mild-steel). This is the only type of bullet permitted in warfare.

    JFP - Jacketed Flat Point. Same as the FMJ, however instead of the tip of the bullet being rounded, it ends in a flat plate.

    JHP - Jacketed Hollow Point. A bullet constructed of a soft lead core enclosed in a hard metal jacket. The top of the bullet has an opening in the jacket, exposing a hollow lead core. On the force of impact, the bullet is forced to open up and expand, resulting in less penetration but greater damage due to the larger diameter of the now expanded bullet.

    JPF - Jacketed Pre-Fragmented. The bullet consists of a metal jacket as in the JHP, but instead of the core being solid lead, it consists of a number of separate projectiles, such as lead shot (the most common), metal disks, or polymer, (or any combination) compressed into the jacket. The tip of the bullet usually has a polymer "cap" with a round-nose profile to ensure reliable feeding. JPF bullets are usually much lighter than normal bullets, and travel at extreme velocities.

    JTC - Jacketed Truncated Cone. Very similar to the JFP, but the sides of the bullet are straight and end in a flat plate, as opposed to the JFP where the sides are more rounded. The JTC bullet has the profile of a cone with a flat plate at the tip instead of a point.

    LTC - Lead Truncated Cone. Same as JTC, however the bullet is constructed completely of lead and has no metal jacket.

    LHP - Lead Hollow Point. Same as the JHP, but the bullet is constructed completely of lead and has no jacket.

    LRN - Lead Round Nose. Same as the FMJ, however the bullet is constructed completely of lead, and has no metal jacket.

    PHP - Plated Hollow Point. Same as the JHP, however, instead of the lead core being enclosed by a metal jacket, it is instead coated with a thin layer of chemically deposited metal.

    SJHP - Semi-Jacketed Hollow Point. Same as the JHP, except the jacket does not completely cover the lead core. Usually a small section (about 2mm or 1/8") at the top of the bullet is left exposed. This is an older design, but is still common in the .38 special, .357 Magnum and .44 Magnum calibers.

    SWC - Semi Wad Cutter. Very similar to the LTC, however the base of the bullet has a slight ridge or shoulder. Thus the diameter of the base of the cone is slightly smaller than the base of the bullet itself. This causes the bullet to cut neat round holes in paper targets, instead of ripping the paper.

    TMJ - Total Metal Jacket. Same as the FMJ, however, unlike the FMJ where the metal jacket encloses the whole bullet except the base, the TMJ bullet's base is also enclosed by the jacket.

    大致上是這幾種,你要更詳細的話,可以到外國賣槍賣子彈的網站上找,很多。

    至於你的問題,手槍步槍是絕對不可能打穿主力戰車的,就算是.50CAL也不可能。至於你說的飛機的機槍,其實是機砲,機砲從20mm~35mm都有,機砲要打穿裝甲的情況有兩種

    一:靠子彈本身的特殊設計來達成,例如A-10的機砲子彈可以打戰車,是因為他的子彈是經過特別設計的,一般平地用的機砲不可能跟戰車打的,頂多打出大洞而已

    二:靠飛機本身的速度再加上子彈的速度,能量夠高,自然能夠打穿主力戰車的裝甲。

  • 1 decade ago

    下次可以請凸◥◤︿◥◤凸大大順便給大家補充美規和英規的口徑好嗎,不然以台灣那種九零手槍的叫法,可能會有人認為9mm子彈比 .50(12.7mm)的大...

  • 1 decade ago

    單以子彈設計理論來討論,是有可能打穿歐美的主力戰車外裝甲.

    但是,像是50口徑的子彈,在某些槍種<火砲種類>,已經可以歸類為小型砲彈.

    因此,若是單論子彈是否可以打穿歐美戰車的外裝甲,在實際上,與未來的設計上,可能是一大趨勢.

    舉例來說,在市面上所稱的子彈與子彈口徑,大多指小口徑武器而言,

    例如 手槍彈常見的.22 .38 .40 .42 .45 .50 <子彈長度不計>

    或是步槍彈常見的 5.56 7.62 <子彈長度不計>

    像這些武器的子彈,明顯看出是以搭配手槍,衝鋒槍,或是步槍在使用..

    而這些武器使用的範圍,則以人員殺傷為目的.

    因此而衍生出了以下主流子彈設計.<只做介紹,用途不做任何說明>

    1.銅皮包鉛彈<包括圓頭與平頭>

    2.空心披甲彈<包含半空心,全空心,或內附鋼芯之特殊彈>

    而這兩大主流的子彈,在設計理論上,與實用上,主要標地,就是對人.

    若假設今天有某子彈工廠,成功的設計出可以以一般小型槍械的子彈口徑大小,達到擊穿一般主力戰車外裝甲的子彈..相信會引起世界大轟動.

    那是另一種戰爭的開始,可能達到所謂的小部隊精兵戰.而屆時,戰車的存在與否,是另一項課題了.

    回到主題.

    現在市面上通用並販售的子彈,是無法達到貫穿主力戰車外裝甲的能力.

    就連所謂的穿甲子彈,實際上是專門用來穿透防彈衣,或是掩蔽效果較小的掩蔽物之用<例如一般車輛版金>.

    而普羅大眾所謂的打戰車專用槍,在實際上,以M82為例,就是以該槍種的超高精密彈道與彈著,配合.50口徑的子彈<這種子彈口徑,放在50機砲上,就叫50機砲砲彈>,專門用來打戰車的砲管,或是駕駛兵與車長的觀測窗,實際上不適用來打外裝甲.

    而戰車殺手A10的格林機砲<通稱>,30mm口徑,那一顆子彈<砲彈>有多大阿?

    而其打擊目標,是針對戰車上方的指揮砲塔與引擎室<那邊因為散熱的關係,通常裝甲會比較薄>..

    藉以達成癱瘓戰車的目的.

    所以要解釋清楚的是,題目上所說的各類子彈,應該做詳細分界..

    不然依據理論,哈~戰車砲用的砲彈,也不算是子彈了??

    2005-06-02 17:43:02 補充:

    關於子彈口徑的大小與換算..

    我是不打算補充,因為那些換算表其實在網路上可以輕易找到.

    而且如果要補充子彈口徑換算表,那就要連各種口徑子彈的長度都要算進去..

    太累嚕~而且我不想拷貝別人辛苦做好的資料...

    所以,抱歉啦~

  • DOGG
    Lv 7
    1 decade ago

    不知道A-10的GAU-8 Avenger打車頂可不可以辦到

    雖然他是專門設計用來獵殺蘇聯系戰車的

    7管30mm格林機砲

    最大射程超過1250m

    500m可擊破68mm裝甲

    1000m可擊破38mm裝甲

Still have questions? Get your answers by asking now.