• Re-Burning music to CD?

    I know this isn't done often these days, but my parents asked me to burn some music for them. My question is, if I take some music off of an older CD, and put it on the new one, will there be a decrease in audio quality, if yes, will it be noticeable?
    I know this isn't done often these days, but my parents asked me to burn some music for them. My question is, if I take some music off of an older CD, and put it on the new one, will there be a decrease in audio quality, if yes, will it be noticeable?
    5 answers · 3 days ago
  • Could a Bluetooth speaker be used as a APM for electric guitar /bass?

    would a electric guitar or a base work on a Bluetooth speaker instead of a expensive amp
    would a electric guitar or a base work on a Bluetooth speaker instead of a expensive amp
    5 answers · 2 weeks ago
  • What are some cheap alternatives to beats headphones?

    Best answer: You can go to any commercial site and survey Bluetooth earphones with the price delimiter set to $50 dollars see what comes up. However, in your case, I'd consider taking your computer in for repair, which may well be less expensive,especially long term, and in addition, restore your ability to use this quite... show more
    Best answer: You can go to any commercial site and survey Bluetooth earphones with the price delimiter set to $50 dollars see what comes up. However, in your case, I'd consider taking your computer in for repair, which may well be less expensive,especially long term, and in addition, restore your ability to use this quite important port. Usually its just a matter of the cheap-*** tinny port being worn or deformed from repeated plugging and un-plugging.
    On a PC, replacing such such jacks are usually just a matter of acquiring a new (pretty standard) SMT, or through hole port part and making three or four soldering connections to the PC's board Vias, or repasting the new one on the provided SMT pads,( depending on the build), maybe five minutes work, once the case is opened and the motherboard exposed. The cost might be reduced by removing the mother board yourself and taking it in, if you are savy enough to attempt it. You could do it yourself if you have the right soldering equipment.
    4 answers · 2 weeks ago
  • Sony ZX770BN (I lost the wired cable)?

    Hello, I have the Sony ZX770BN Wireless Noise-Canceling Headphones. They are Bluetooth headphones, I recently lost the aux cable so now I cant use it wired when I don't have chargeWhere Can I get an audio cable to connect my headphones to my laptop without bluetooth? (IN INDIA)
    Hello, I have the Sony ZX770BN Wireless Noise-Canceling Headphones. They are Bluetooth headphones, I recently lost the aux cable so now I cant use it wired when I don't have chargeWhere Can I get an audio cable to connect my headphones to my laptop without bluetooth? (IN INDIA)
    4 answers · 2 weeks ago
  • What kind of wireless headphones to use for mowing so I can listen to music or podcast while I mow?

    Is it possible to leave iPhone in my house while mowing in a large urban lawn I live in a city
    Is it possible to leave iPhone in my house while mowing in a large urban lawn I live in a city
    5 answers · 2 weeks ago
  • One side of my mobile headphones always break?

    I bought a new pair of my mobile earphones on thursday and then i somehow managed to brake one side of them today. It's like I need to brake 5 of them until I find a good pair... (I don't break the side it just doesnt work, if i twist the input connector then the side works for 5 sec....)
    I bought a new pair of my mobile earphones on thursday and then i somehow managed to brake one side of them today. It's like I need to brake 5 of them until I find a good pair... (I don't break the side it just doesnt work, if i twist the input connector then the side works for 5 sec....)
    4 answers · 2 weeks ago
  • Belt drive or direct drive?

    8 answers · 3 weeks ago
  • I have the grannys garden cd from primary school but i dont have a computer which has a cd player in it?

    I have the grannys garden cd from primary school but i dont have a computer which has a cd player in it?

    Best answer: CD drives and players are readily available for reasonable prices.
    Get one.
    Best answer: CD drives and players are readily available for reasonable prices.
    Get one.
    5 answers · 3 weeks ago
  • Headphone cords rippling?

    Headphone cords rippling?

    Best answer: No. That rippling shows that the internal wire conductors were stretched and when they returned to normal the outer insulation sheath didn't return to normal. It's highly suggestive, along with your description, that one or more of the internal wires snapped. If your headphones are of the type with... show more
    Best answer: No. That rippling shows that the internal wire conductors were stretched and when they returned to normal the outer insulation sheath didn't return to normal. It's highly suggestive, along with your description, that one or more of the internal wires snapped.

    If your headphones are of the type with user-replaceable cords which just plug in, then buy new cords. If not, the headphones are now fit only for the recycling bin.
    5 answers · 3 weeks ago
  • What did iTunes do to my music?!!?

    Best answer: Using sync makes playlists identical on all devices that connect.

    Call it a big "ooops" and get on with life.
    Best answer: Using sync makes playlists identical on all devices that connect.

    Call it a big "ooops" and get on with life.
    5 answers · 3 weeks ago
  • How to fix my record player?

    I have a Victrola portable Bluetooth turntable. When I put the power supply in (DC in Jack) in and i turn the function knob to phono position. I finally turn it on, it makes a clicking sound, the turntable doesn't spin, there is no light s that comes on when i turn it on. I don't know what is wrong, can... show more
    I have a Victrola portable Bluetooth turntable. When I put the power supply in (DC in Jack) in and i turn the function knob to phono position. I finally turn it on, it makes a clicking sound, the turntable doesn't spin, there is no light s that comes on when i turn it on. I don't know what is wrong, can someone help?
    6 answers · 4 weeks ago
  • Does anyone know of and MP3 player that works like Ipod but doesn't cost an arm or a leg and holds at lease 32 gbs of music?

    I'm trying to find something that actually stores my music alphabetically and in cd style. The last MP3 player I got from amazon would only let you go through one song at a time which was really annoying.
    I'm trying to find something that actually stores my music alphabetically and in cd style. The last MP3 player I got from amazon would only let you go through one song at a time which was really annoying.
    6 answers · 1 month ago
  • Audio Technica Playing records a tad too fast.?

    Best answer: While I can't say I'm a fan of the LP60, it is definitely far better than some of the machines on the market these days. There are two main things to check. First is the motor pulley. If it has anything on it that doesn't belong there, such as hair, lint, or particles shed from the belt, it needs... show more
    Best answer: While I can't say I'm a fan of the LP60,
    it is definitely far better than some of the machines on the market these days.


    There are two main things to check.

    First is the motor pulley.

    If it has anything on it that doesn't belong there,
    such as hair, lint, or particles shed from the belt,
    it needs to be cleaned.
    Don't use Anything that can scar it, such as screwdrivers,
    cutting blades of any kind, metal tweezers, etc.

    If the pulley is plastic, use 91% or better isopropyl alcohol and Q-Tips to remove any deposits.

    If it is metal (aluminium or brass), use either the aforementioned alcohol or MEK (methyl ethyl ketone).
    Don't use MEK on plastics!
    Another good chemical, if you can find any, is TF solvent (Freon 113), but it's nearly impossible to obtain any more.
    It is safe on most plastics.


    The other thing to check is any motor speed adjustments provided.
    (I don't know whether there are any on that model).

    If there is some sort of adjustment, place a strobe disc on the platter
    and adjust the speed until the pattern appears to stand still.
    Sometimes it won't stand absolutely still; in that case, get it as close as you can.

    You will need a fluorescent light of limited brightness (to minimize glare),
    or a neon night light plugged into an extension cord, to do this.




    Or, take it to an audio repair shop and have a professional do the work.
    4 answers · 1 month ago
  • How do I digitize a cassette tape?

    I have some old cassette tapes with voice recordings (no music) that I want to put on my computer. I got a USB cassette player and saved them, but just one of the tapes was over 1GB. Does it really have to be that big, or is there a setting I can change?
    I have some old cassette tapes with voice recordings (no music) that I want to put on my computer. I got a USB cassette player and saved them, but just one of the tapes was over 1GB. Does it really have to be that big, or is there a setting I can change?
    4 answers · 1 month ago