Lv 2384 points

Andrew B

Favorite Answers26%
Answers23
  • Movie or short story that has a store with dolls in it?

    I barely remember it and have been looking everywhere but someone is looking through a glass window at something in a store. When they go into the store the walls are lined with dolls and in the end after they go and touch what they want they end up becoming another doll on the shelf

    Thanks in advance

    1 AnswerMovies9 years ago
  • new rebuilt motor wont start.?

    i just got my 327 bored out to a 355 and all new parts and my motor wont turn over. it will backfire and shoot fuel out the carb. if i step on the gas hard as i crank it over it will shoot fire. what is my problem?

    7 AnswersMaintenance & Repairs1 decade ago
  • are there any chevy 355 emblems?

    anybody know where i can get emblems for my 355 motor. it was a 327 but now that its bored out i cant find new emblems. im thinking of making my own using 2 350 emblems and molding them together but before i waste my money i want to know if anybody makes them. they need to fit a 1967 chevelle front fender

    1 AnswerChevrolet1 decade ago
  • how do i determine what CFM carb to use?

    I have a 1968 327 bored .040 over pushing about 355hp. how do i determine what carb to choose. i have an edelbrock 600 cfm carb on it now and performer intake manifolds

    7 AnswersChevrolet1 decade ago
  • bored my 327 to a 355?

    i had a large journal 327 from a 68 corrvette with 350 hp. i gave my motor to a shop and said i had 3000 to spend on a rebuild, they told me they bored it out to a 355 and are putting in larger rods to increase compression. Anybody have a good guess how much horsepower i will be pushing now? i have a 600cfm edelbrock carb and a edelbrock performer intake manifold. i believe a comp cam is going into it during the rebuild

    7 AnswersChevrolet1 decade ago
  • What to do about my newly discovered corvette motor?

    i thought my 1967 Malibu had its original 327 in it but today i just found out a while back someone put a 1968 327 corvette motor in it. Is this a good motor? I just took out my old slip and slide powerglide and installed a th350. Only mods are Edelbrock performer intake manifold and carb. Just tried to put in my new hooker headers but they didnt fit so im getting hedman instead. What can i do to make my car faster? before the all the listed mods and tranny i ran a 17.99 quarter mile.

    4 AnswersChevrolet1 decade ago
  • Can anyone tell me what these numbers on my 67 chevelle mean?

    Door panel numbers are 13669 7Z137136. and firewall numbers are D4A ST 67-13669 BF01475

    TR 782 CC 35840 040110

    2 AnswersChevrolet1 decade ago
  • My 327 is burning oil.?

    I have at 1967 327 motor and every 3 days my oil is empty. i keep filling it and filling it but its constantly burning oil. Its not leaking in my driveway so i assume im burning it. My tailpipes are coated in grime which gives me more reason to believe it.

    4 AnswersMaintenance & Repairs1 decade ago
  • What can i do to make my 327 faster?

    I have a 1967 327ci with a powerglide attached to it in my 1967 malibu. it has 66,666 original miles. I want to make it much faster it runs a 17.86 on the 1/4 mile. i was wondering if i could run this package http://www.summitracing.com/parts/EDL-2099/ with my stock engine? i have a edelbrock performer carb 600cfm on my motor currently. and if i cant run that package what could i do to make my motor accept that upgrade. my dream is to make my car faster than 15.00 in the 1/4 mile. Thank you

    5 AnswersChevrolet1 decade ago
  • Cam for 327ci Engine?

    I have a 1967 327ci small block chevy engine with 65k original miles on it. The motor is all stock besides a 4 barrel 600cfm Edelbrock Performer Carburator and im putting an Edelbrock 2101 Performer Intake Manifold on soon. Im looking for a good cam or a way to find a good cam for it.

    2 AnswersChevrolet1 decade ago