Lv 43,107 points

Zack

Favorite Answers11%
Answers837

my 4th home, if all else fails Y!A is there, unless Y!A crashes then the murderin' starts...

  • bug in Skyrim side quest can't complete?

    I got another quest from Urag to get a copy of "The Wild Elves" so I though great I have that already, but the map tells me to go find it and I cant drop it since it is a quest item and it won't update so I can give him the book, this is on the ps3. I there anything I can do to progress this, the chest where it is supposed to be is empty since I was already there and I can't put it back, do I just wait and hope the next patch will include a fix?

    2 AnswersVideo & Online Games9 years ago
  • 1989 Cherokee 4.0 rough idle in very specific circumstances?

    My jeep idles really rough and sometimes dies only after I drive my jeep then turn it off and if I try to start it after about ten minutes it idles rough, it has died twice, but if I start it again in less than ten minutes it starts and idles fine or if I start it about thirty minutes later it is fine as well. It has a new throttle position sensor, I ran some carb cleaner in it, its the 4.0, the idle air control valve is cleaner than it used to be.

    what is the problem? I need to smog it soon so I want this fixed in case it makes it fail.

    2 AnswersJeep10 years ago
  • 89 Cherokee XJ rear end is clunking?

    I've checked the u-joints and they are not the cause, and the transmission isn't the problem either, So I'm sure its the rear end but what would make a loud clunk like that, it usually happens when I shift from drive to reverse, though it occasionally happens when I do the opposite. I think it is either the ring and pinion gears or the spider gears, I plan on changing the diff oil soon so what should I look for to tell me what the cause is?

    the specs: dana 35c

    no track-lok

    abs

    if any of that matters.

    2 AnswersJeep10 years ago
  • Need help with my 1989 Jeep Cherokee?

    It has the 4.0L with an AW4 transmission and np-242 transfer case

    one problem is the idle gets a little funky it will idle really low and almost die, did once, but more often after driving a while when I put it in park or neutral the idle jumps to around 1500rpm

    also what is a good way to test the 4wd without getting stuck somewhere in the mud, when i throw it in 4high it doesn't have the feeling of it engaging in the steering wheel and the dash light could just be out so that's not what im looking for.

    2 AnswersJeep1 decade ago
  • Installing fuel pump, '92 Cherokee?

    I have the new one in my jeep but I am having trouble trying to line it up with what ever it needs to be lines up with, I think its the return line thingy. I can't align everything so it won't seat properly to install the lock ring. Any tips on installing this would be nice because I don't want to drop the tank, <1/4 tank of gas in it.

    1 AnswerMaintenance & Repairs1 decade ago
  • 1992 Jeep Cherokee self diagnostic?

    the thing where you turn the key on and off in a specific sequence, My chiltons manual tells my how to do it and it has all the codes but I can't get it to work on my jeep, the manual says this works on '91-'93 model years and mine is a '92, I also tried disconnecting the battery for a few minute (around 2) to reset it or something. the actual scan tool my local auto parts store has is a booklet, not a real scan tool.

    How do I get my jeep to do the diagnostic?

    1 AnswerJeep1 decade ago
  • '92 Jeep cherokee won't start?

    hit my jeep pretty hard going over a curbed planter in a parking lot, it hit right where the lower control arms mount to the frame/body, it hit there twice and after I was over it completely it died, I gave it a minute and tried starting it, it turned over but the fuel pump didn't switch on which it usually does and the check engine light is on. I looked for loose wires and other things I even tried swapping the relays to the fuel pump. need help, what is wrong with my jeep?

    Jeep1 decade ago
  • How do I remove water based acrylic paint from a plastic model?

    Would soaking the parts in water do the trick?

    1 AnswerHobbies & Crafts1 decade ago
  • Gundam Model grade question?

    What grade of gundam model has the movable hands ( the fingers move)

    1 AnswerHobbies & Crafts1 decade ago
  • Need Gundam model instructions?

    I lost the instructions to gundam model, the gundam00: throne zwei and I need a part number so I can order an extra. If anyone knows any sites that has these up that is what I am looking for.

    4 AnswersHobbies & Crafts1 decade ago
  • Repair my old PS2 that is not reading discs?

    I have and old PS2 (the fat one, not the slim) and it won't read discs I am aware that there are some tricks that can help, I already cleaned the lens directly, it worked perfect on my friends ps2, but mine is something else, it's model no. is SCPH-39001

    I you know some link to some good tutorials with a lot of detail and pictures that is what Im looking for, Im aware of the methods but finding an in depth tutorial is a pain.

    1 AnswerPlayStation1 decade ago
  • What Evangelion DVD set should I get?

    I just started watching it, a little late I know, and I'm not sure about whether or not to get the platinum collection, the one in the tin, or if I should get the new rebuild, though it seems to lack extras. does the platinum have English 5.1audio? I checked but I couldn't find the details on it. Is the rebuild worth it?

    If you own any of these or both I want your feedback, I won't be getting blu-ray because I don't have and HDtv so it won't be worth the investment anytime soon.

    1 AnswerComics & Animation1 decade ago
  • how do i fix my net gear wireless router?

    I was messing with the settings and now it won't connect wirelessly and I tried accessing the router login but it keep prompting me for my password no matter how many times i put it in, i also hit the reset button so i tried using "password" but the same thing happened. is it because it wan't hooked up to the modem, though i don't think that should matter but i could be wrong i was once already

    i had it working fine 'til i ruined it, i changed the wireless channel from 1 to 11, it s wgr614v7

    and i tried net gear support i found nothing helpful

    help me out and i promise i won't do it again.

    2 AnswersComputer Networking1 decade ago
  • What flowmaster should i get?

    I have a '95 Dodge 2500 V10 2wd and supercharged, the flowmaster on it was from a dodge with a 318c.i. and i suspect it is too small

    3 AnswersDodge1 decade ago
  • '93-'94 GSX-R 600 Headers, what else do they fit?

    I have these performance headers and was wondering what other bikes if any they fit.

    1 AnswerMotorcycles1 decade ago
  • How to get plates and title to motorcycle in CA?

    The previous owner had planned to make this a flat track bike so they no longer have the title or plates because they weren't needed, and now that I have it I would like to get these to put it back on the street. I've spent hours on the CA dmv website and couldn't find anything. If anyone else has had to deal with this I would like to know what I need to do.

    2 AnswersInsurance & Registration1 decade ago
  • How do I setup XBCD with my modified xbox controller on vista?

    I modified an old xbox 1 controller and downloaded the xbcd driver but i can't get my computer to let me choose the xbcd as the driver.

    it just tries to automatically do it and it comes up with nothing.

    1 AnswerXbox1 decade ago
  • Top Gear Vietnam special, Clarkson's Vespa?

    Is he riding a 180ss vespa, the headlight looks like it but it has all those damn mirrors in front of it most of the show.

    2 AnswersMotorcycles1 decade ago
  • Cant remember name manga!?

    I can't remember the name of the series, its on onemanga, it is about a vampire who's daughter (human mother) shows up at his house after her mother dies, the vampire know a detective or something and i think he drink the blood of a criminal, that is all I can remember.

    1 AnswerComics & Animation1 decade ago
  • Does an xbox have to be modded to use a pc dvd drive?

    My thomson TGM600 went out and I want to replace it with one that is more reliable or cheaper to replace. is there something to the drive that allows it to play xbox games or is it just a regular dvd drive with a different power connector.

    2 AnswersXbox1 decade ago